Aspindale Avon....Probably
- Mick
- Chub
- Posts: 1014
- Joined: Wed Apr 22, 2015 9:10 am
- 9
- Location: Buckinghamshire
Re: Aspindale Avon....Probably
Lovely rod Jeremy, good work! Look out Crucians!!!
- Bob Brookes
- Zander
- Posts: 3662
- Joined: Sun Oct 23, 2011 6:54 pm
- 12
- Location: Nottinghamshire
Re: Aspindale Avon....Probably
It is a lovely rod, improved still by the longer handle that Jeremy has gifted it with. It is certainly an early rod from the Brothers era as it came with the original bag with the remnants of the original label. It is also a very similar 10' 6" rod to mine that Jeremy referred to in his post. That one has the full Avon inscription and is designated as No.896.
As a follow up I just acquired yet another Aspindale Avon, this time a 12ft version. I bought a good example a couple of years ago which I soon sold on was too cumbersome at that length. This new one is very original but in need of work. It is a full length whole cane/whole cane/sliced tip however the handle is actually a reasonable length. I still don't like it as it is, so it may not finish up as a 12' rod. Like Jeremy's rod it just says Aspindale, so it will probably end up as a better useable Avon style rod.
As a follow up I just acquired yet another Aspindale Avon, this time a 12ft version. I bought a good example a couple of years ago which I soon sold on was too cumbersome at that length. This new one is very original but in need of work. It is a full length whole cane/whole cane/sliced tip however the handle is actually a reasonable length. I still don't like it as it is, so it may not finish up as a 12' rod. Like Jeremy's rod it just says Aspindale, so it will probably end up as a better useable Avon style rod.
"You do not cease to fish because you get old, you get old because you cease to fish"
- Wallys-Cast
- Pike
- Posts: 6624
- Joined: Tue Mar 20, 2012 11:02 am
- 12
- Location: Durham.
Re: Aspindale Avon....Probably
Another fine job Jeremy. I have always thought 10ft 6in to 11ft is the best overall length for these whole cane float rods.
I used to have a very nice 12ft version without a model number or name. It had a full length built cane tip section, whole cane middle and butt. I extended the cork grip from 20 inch to 24 inch and this made a world of difference to the rod when in use.
Wal.
I used to have a very nice 12ft version without a model number or name. It had a full length built cane tip section, whole cane middle and butt. I extended the cork grip from 20 inch to 24 inch and this made a world of difference to the rod when in use.
Wal.
- TrentFisher
- Crucian Carp
- Posts: 793
- Joined: Mon Nov 18, 2013 8:13 pm
- 10
- Location: Nottingham
Re: Aspindale Avon....Probably
Hi Jeremy,
looks pretty identical to mine,which I purchased some years ago from a dealer and it remains a regular user.I love it...too strong an expression!
All the best
Nige.
looks pretty identical to mine,which I purchased some years ago from a dealer and it remains a regular user.I love it...too strong an expression!
All the best
Nige.
-
- Zander
- Posts: 3761
- Joined: Tue Oct 27, 2015 8:05 am
- 8
- Location: Matlock Derbyshire
Re: Aspindale Avon....Probably
Love to see pics Nige if you have them?TrentFisher wrote: ↑Fri Apr 08, 2022 8:05 pm Hi Jeremy,
looks pretty identical to mine,which I purchased some years ago from a dealer and it remains a regular user.I love it...too strong an expression!
All the best
Nige.
"Oh for want of rod and line I'd fish this stream serene, sublime".
- Bob Brookes
- Zander
- Posts: 3662
- Joined: Sun Oct 23, 2011 6:54 pm
- 12
- Location: Nottinghamshire
Re: Aspindale Avon....Probably
Just had a better look at the very recent acquisition of the 12 footer Avon (?) I mentioned previously. It is full length with all of the original whippings and the lacquered intermediates are excellent and rust free. It has porcelain lined tip and butt rings, so another case of a builder using what is available! Despite it being extremely original it is still a rubbish fishing rod in the current configuration.
"You do not cease to fish because you get old, you get old because you cease to fish"
-
- Zander
- Posts: 3761
- Joined: Tue Oct 27, 2015 8:05 am
- 8
- Location: Matlock Derbyshire
Re: Aspindale Avon....Probably
I had one at 12 ft too Bob and sold it on but with hindsight I should have worked at it to make it nicer to fish with.
I am becoming quite a fan of rods with whole cane butt and middle sections and built cane tips. They definitely have merit and with handle lengths to balance the overall length can be very nice in the hand. Quite powerful too judging by the experience of Allrounder and Paul F with their Hardy Generals!
They are not simply roach rods as I mistakingly assumed but have a much wider application.
I am becoming quite a fan of rods with whole cane butt and middle sections and built cane tips. They definitely have merit and with handle lengths to balance the overall length can be very nice in the hand. Quite powerful too judging by the experience of Allrounder and Paul F with their Hardy Generals!
They are not simply roach rods as I mistakingly assumed but have a much wider application.
"Oh for want of rod and line I'd fish this stream serene, sublime".
- Wallys-Cast
- Pike
- Posts: 6624
- Joined: Tue Mar 20, 2012 11:02 am
- 12
- Location: Durham.
Re: Aspindale Avon....Probably
I fully agree Jeremy, they can be altered to suit our modern style of fishing by adding a bit to the handle length and maybe a bit of weight added to the butt end cap for an even better balance.
There are two versions of course, the Thames style, built with heavier cane sections which gives a fairly stiff tip only action or the Sheffield style which is built with thinner more flexible cane sections giving a more through action (sometimes called an Avon action). The Sheffield type is my preferred rod, certainly in the longer lengths.
Wal.
There are two versions of course, the Thames style, built with heavier cane sections which gives a fairly stiff tip only action or the Sheffield style which is built with thinner more flexible cane sections giving a more through action (sometimes called an Avon action). The Sheffield type is my preferred rod, certainly in the longer lengths.
Wal.
-
- Zander
- Posts: 3761
- Joined: Tue Oct 27, 2015 8:05 am
- 8
- Location: Matlock Derbyshire
Re: Aspindale Avon....Probably
So the rod I've just done would be a Sheffield style I assume Wal?Wallys-Cast wrote: ↑Sun Apr 10, 2022 2:15 pm I fully agree Jeremy, they can be altered to suit our modern style of fishing by adding a bit to the handle length and maybe a bit of weight added to the butt end cap for an even better balance.
There are two versions of course, the Thames style, built with heavier cane sections which gives a fairly stiff tip only action or the Sheffield style which is built with thinner more flexible cane sections giving a more through action (sometimes called an Avon action). The Sheffield type is my preferred rod, certainly in the longer lengths.
Wal.
It does bend when you pull hard on it, it would bring a good chub to heal no bother!
"Oh for want of rod and line I'd fish this stream serene, sublime".
- Wallys-Cast
- Pike
- Posts: 6624
- Joined: Tue Mar 20, 2012 11:02 am
- 12
- Location: Durham.
Re: Aspindale Avon....Probably
Yes I think Aspindales only made Sheffield (Avon) versions.
Thames rods are stiffer with tip action only, great for quick biting fish but unforgiving on larger fish and can lead to broken lines or hook pulls.
Thames rods are stiffer with tip action only, great for quick biting fish but unforgiving on larger fish and can lead to broken lines or hook pulls.