Octofloat Section Lengths
-
- Zander
- Posts: 3769
- Joined: Tue Oct 27, 2015 8:05 am
- 8
- Location: Matlock Derbyshire
Octofloat Section Lengths
Yesterday was cold, wet, grey, miserable and so was I.
I wanted to go fishing but just could not muster the get up and go to.... well, get up and go!
So instead I decided to knock up a rod rack from some bits of Oak which I obtained form my daughters cot. I hasten to add that she was not in it at the time having progressed to a bed several years ago. My wife couldn't bear to part with it so it has been stored in my workshop and has been cannibalised several times to provide oak for various projects (with permission of course).
Having completed it I was placing the rods on the rack and noticed that the tip section of my Octofloat was slightly shorter than the butt and middle section by about two inches. Is this normal or do you think it has lost a bit off the top? The rod has been restored and looks lovely in the rack along with my other cane rods.
I have tried to find a specification for the rod on the forum and an internet search did not provide any relevant info either.
Look forward to receiving your comments with fingers crossed.
Jeremy.
I wanted to go fishing but just could not muster the get up and go to.... well, get up and go!
So instead I decided to knock up a rod rack from some bits of Oak which I obtained form my daughters cot. I hasten to add that she was not in it at the time having progressed to a bed several years ago. My wife couldn't bear to part with it so it has been stored in my workshop and has been cannibalised several times to provide oak for various projects (with permission of course).
Having completed it I was placing the rods on the rack and noticed that the tip section of my Octofloat was slightly shorter than the butt and middle section by about two inches. Is this normal or do you think it has lost a bit off the top? The rod has been restored and looks lovely in the rack along with my other cane rods.
I have tried to find a specification for the rod on the forum and an internet search did not provide any relevant info either.
Look forward to receiving your comments with fingers crossed.
Jeremy.
"Oh for want of rod and line I'd fish this stream serene, sublime".
Re: Octofloat Section Lengths
Sounds like it's lost a bit Jeremy, love to see your new rack.
-
- Zander
- Posts: 3769
- Joined: Tue Oct 27, 2015 8:05 am
- 8
- Location: Matlock Derbyshire
Re: Octofloat Section Lengths
I'll send you a pic when I have cleaned it up and varished it, it's a bit basic mind.
Do you think the loss of two inches off the top will affect it's action much Paul?
"Oh for want of rod and line I'd fish this stream serene, sublime".
Re: Octofloat Section Lengths
The action will have changed ( stiffer) but unless you had a full length version to compare it too how would you ever know? Unless it's particularly precious too you I wouldn't worry about it Jeremy.Jeremy Croxall wrote: ↑Sun Jan 29, 2017 9:47 amI'll send you a pic when I have cleaned it up and varished it, it's a bit basic mind.
Do you think the loss of two inches off the top will affect it's action much Paul?
-
- Zander
- Posts: 3769
- Joined: Tue Oct 27, 2015 8:05 am
- 8
- Location: Matlock Derbyshire
Re: Octofloat Section Lengths
Here it is Paul:
I notice the pics need rotating, any one know how to do it?
Last edited by Jeremy Croxall on Sun Jan 29, 2017 2:16 pm, edited 1 time in total.
"Oh for want of rod and line I'd fish this stream serene, sublime".
- Ljm183
- Rainbow Trout
- Posts: 3186
- Joined: Fri Nov 25, 2011 12:34 pm
- 12
- Location: Aveley, Essex
Re: Octofloat Section Lengths
Measure the rod when put together, if it,s 11ft or more it,s OK . I had three Octofloats all had slightly shorter tip sections
-
- Zander
- Posts: 3769
- Joined: Tue Oct 27, 2015 8:05 am
- 8
- Location: Matlock Derbyshire
Re: Octofloat Section Lengths
Just measured it at 10' 10 3/4"
"Oh for want of rod and line I'd fish this stream serene, sublime".
- Ljm183
- Rainbow Trout
- Posts: 3186
- Joined: Fri Nov 25, 2011 12:34 pm
- 12
- Location: Aveley, Essex
Re: Octofloat Section Lengths
Yep looks like you've lost a bit
Re: Octofloat Section Lengths
That's marvellous Jeremy, I love things made from "things" , very cleverJeremy Croxall wrote: ↑Sun Jan 29, 2017 1:19 pmHere it is Paul:
I notice the pics need rotating, any one know how to do it?
- Ljm183
- Rainbow Trout
- Posts: 3186
- Joined: Fri Nov 25, 2011 12:34 pm
- 12
- Location: Aveley, Essex
Re: Octofloat Section Lengths
Jeremy Croxall wrote: ↑Sun Jan 29, 2017 1:19 pm
I notice the pics need rotating, any one know how to do it?
If you're using a laptop or pc , right click on the picture and select view image the picture opens and it,s the right way.
It also gives you the option to zoom in.
--------------------------------------------------------------------------
I think the original being side on is something to do with Tinypic..