Precision Rods 'R. Sealey's Marsden.'
- AshbyCut
- Honorary President
- Posts: 10150
- Joined: Sun May 06, 2012 1:27 am
- 12
- Location: North Warwickshire
Precision Rods 'R. Sealey's Marsden.'
An internet contact was walking through his home town today when he spotted a rod standing forlornly outside a 2nd. Hand Shop. and I'm fortunate enough to say that he's allowed me to add it to my Precision stable.
This is a Precision Rods 'R. Sealey's Marsden' in a very sorry state, but which I'm sure I can bring back to something usable given time.
It's a 2 piece, 10ft. 2 or 3 in. split cane rod, which is apparently their version of the Mk IV avon rod ... so I'll be fascinated to compare the taper with Mr. Walker's original.
Particularly fascinating is the fact that I also have a later Bernard Sealey and Co. 'Marsden,' which is a 2 piece 10ft. fibre glass rod of 'ferruleless' construction ... so I'm eager to compare the two side by side.
Only a couple of rather shaky photos at present (these were all he gave me to work from ... and told me he at first thought it was 12ft. in length !!!) ... but these will be updated as work starts and progresses ... and, my word ... it does need work.
By the way ... love the 'tulip' tip guide !!!!!
((Yes ... I Know ... that's 26 rods by this maker now !!! ))
This is a Precision Rods 'R. Sealey's Marsden' in a very sorry state, but which I'm sure I can bring back to something usable given time.
It's a 2 piece, 10ft. 2 or 3 in. split cane rod, which is apparently their version of the Mk IV avon rod ... so I'll be fascinated to compare the taper with Mr. Walker's original.
Particularly fascinating is the fact that I also have a later Bernard Sealey and Co. 'Marsden,' which is a 2 piece 10ft. fibre glass rod of 'ferruleless' construction ... so I'm eager to compare the two side by side.
Only a couple of rather shaky photos at present (these were all he gave me to work from ... and told me he at first thought it was 12ft. in length !!!) ... but these will be updated as work starts and progresses ... and, my word ... it does need work.
By the way ... love the 'tulip' tip guide !!!!!
((Yes ... I Know ... that's 26 rods by this maker now !!! ))
Last edited by AshbyCut on Wed Oct 21, 2020 3:05 pm, edited 4 times in total.
"Beside the water I discovered (or maybe rediscovered) the quiet. The sort of quiet that allows one to be woven into the tapestry of nature instead of merely standing next to it." Estaban.
- Bumble
- Rainbow Trout
- Posts: 3212
- Joined: Tue Mar 13, 2012 7:49 am
- 12
- Location: Berkshire
Re: Precision Rods 'R. Sealey's Marsden.'
Well done that man.
Bumble
Bumble
- LuckyLuca
- Barbel
- Posts: 4794
- Joined: Mon Jul 02, 2012 10:20 am
- 11
- Location: Oxfordshire
Re: Precision Rods 'R. Sealey's Marsden.'
Very nice Mal! Or it will be once you've worked your magic on it!
I walked across an empty land
I knew the pathway like the back of my hand
I felt the earth beneath my feet
Sat by the river and it made me complete.
I knew the pathway like the back of my hand
I felt the earth beneath my feet
Sat by the river and it made me complete.
- Wallys-Cast
- Pike
- Posts: 6654
- Joined: Tue Mar 20, 2012 11:02 am
- 12
- Location: Durham.
Re: Precision Rods 'R. Sealey's Marsden.'
Well done Mal,
I'll bet that cane looks absolutely wonderful underneath all the crusty varnish. Like a butterfly emerging from its cocoon. (did you like that?)
It looks like you will have to be very careful saving that Sealey shield but I am sure you will do it.
Wal.
I'll bet that cane looks absolutely wonderful underneath all the crusty varnish. Like a butterfly emerging from its cocoon. (did you like that?)
It looks like you will have to be very careful saving that Sealey shield but I am sure you will do it.
Wal.
- Paul F
- Sea Trout
- Posts: 4241
- Joined: Sat Jul 20, 2013 11:12 pm
- 10
- Location: The West Country
Re: Precision Rods 'R. Sealey's Marsden.'
A lot of work ahead, but I am sure it will look the biz, well done on your find Mal
- Gord
- Crucian Carp
- Posts: 787
- Joined: Mon Jul 02, 2012 10:57 pm
- 11
- Location: Romsey, Hampshire
Re: Precision Rods 'R. Sealey's Marsden.'
i must say mal you have certainly have your work cut out and i am looking forward to seeing the end result
when you are going through hell just keep on going (winston churchill)
- AshbyCut
- Honorary President
- Posts: 10150
- Joined: Sun May 06, 2012 1:27 am
- 12
- Location: North Warwickshire
Re: Precision Rods 'R. Sealey's Marsden.'
The rod arrived safe and sound today ... and I was like a kid at Christmas getting the wrapping off !!!
The condition was exactly as I had been told, with the old varnish peeling away with just a glance ... BUT ... this meant that I could see the cane beneath ... and it looks wonderful. The agate liners in both butt and tip guides are present and crack-free.
I'd seen mention of this rod as a 'carp rod' and a 'Mk. IV.,' so it was straight out with the digital caliper to check the taper., and the scales to check the weight.
The rod weighs in at 12.05oz. (341gr.), with a 28in. handle that will clean up nicely.
As for the tapers, comparable points to those listed as Chapman's Mk. IV tapers, I found the following :-
Precision :- Butt ... 48" = 0.387in. 36" = 0.436in. Tip ... 60" = 0.129in. 48" = 0.197in. 36" = 0.225in. 24" = 0.262in. 3" = 0.129in.
Chapman's :- Butt ... 48" = 0.397in. 36" = 0.433in. Top ... 60" = 0.120in. 48" = 0.184in. 36" = 0.230in. 24" = 0.254in. 3" = 0.137in.
This confirms that the tapers are based on the Walker Mk. IV specification ... and we can regard the 'Marsden' as Robert Sealey's 'Mk. IV.'
A delightful 'extra' is that there's a retailer's sticker still in place and, though a little indistinct, it shows that the rod was originally sold by "Ogden Smith, London, England. Established 1763." I'm sincerely hoping that this can be retained !
The condition was exactly as I had been told, with the old varnish peeling away with just a glance ... BUT ... this meant that I could see the cane beneath ... and it looks wonderful. The agate liners in both butt and tip guides are present and crack-free.
I'd seen mention of this rod as a 'carp rod' and a 'Mk. IV.,' so it was straight out with the digital caliper to check the taper., and the scales to check the weight.
The rod weighs in at 12.05oz. (341gr.), with a 28in. handle that will clean up nicely.
As for the tapers, comparable points to those listed as Chapman's Mk. IV tapers, I found the following :-
Precision :- Butt ... 48" = 0.387in. 36" = 0.436in. Tip ... 60" = 0.129in. 48" = 0.197in. 36" = 0.225in. 24" = 0.262in. 3" = 0.129in.
Chapman's :- Butt ... 48" = 0.397in. 36" = 0.433in. Top ... 60" = 0.120in. 48" = 0.184in. 36" = 0.230in. 24" = 0.254in. 3" = 0.137in.
This confirms that the tapers are based on the Walker Mk. IV specification ... and we can regard the 'Marsden' as Robert Sealey's 'Mk. IV.'
A delightful 'extra' is that there's a retailer's sticker still in place and, though a little indistinct, it shows that the rod was originally sold by "Ogden Smith, London, England. Established 1763." I'm sincerely hoping that this can be retained !
Last edited by AshbyCut on Wed Oct 21, 2020 3:08 pm, edited 2 times in total.
"Beside the water I discovered (or maybe rediscovered) the quiet. The sort of quiet that allows one to be woven into the tapestry of nature instead of merely standing next to it." Estaban.
- Wagtail
- Arctic Char
- Posts: 1622
- Joined: Sat Dec 29, 2012 12:26 pm
- 11
Re: Precision Rods 'R. Sealey's Marsden.'
I'm not in the slightest bit jealous.......... I'm not.......... I'm not I tell you
'The Chub is a very controversial fish. He has a strong army of supporters, but he has an almost equally strong army of detractors. The trouble is that the detractors do not know what they are talking about'. L. Vernon-Bates
- Marc
- Sea Trout
- Posts: 4011
- Joined: Sun Mar 10, 2013 11:14 am
- 11
- Location: Co Durham, land of the prince bishops
Re: Precision Rods 'R. Sealey's Marsden.'
You lucky thing. What a great find, good luck with the restoration.
Marc. (Prince of Durham)
“A life that partakes even a little of friendship, love, irony, humor, parenthood, literature, and music, and the chance to take part in battles for the liberation of others cannot be called 'meaningless'...”
“A life that partakes even a little of friendship, love, irony, humor, parenthood, literature, and music, and the chance to take part in battles for the liberation of others cannot be called 'meaningless'...”
Re: Precision Rods 'R. Sealey's Marsden.'
Nice one mal, I look forward to seeing it when you've finished.