Finally got myself a ARS at a decent price just missing its line guard but the free one i was given has a line guard I can put to good use.
My question is the Wick Oiler is rather tight on both reels and wondered if anyone can advise me how to remove it without damaging it?
Mine is a plastic cog.
All I can think of is maybe leaving it outside in the hot sun when we get some for a short while enough to see if this might help ease its movement.
Kind regards
Martin
Avon Royal Supreme Wick Oiler
- Martin(rockape)
- Ruffe
- Posts: 73
- Joined: Fri Aug 02, 2019 2:55 am
- 4
- Location: Northamptonshire
Avon Royal Supreme Wick Oiler
Last edited by Martin(rockape) on Sat May 15, 2021 9:18 pm, edited 1 time in total.
- Duckett
- Tench
- Posts: 2889
- Joined: Wed May 17, 2017 2:42 pm
- 6
- Location: Stratford E15
Re: Avon Royal Supreme Wick Oiler
I have 2, an early 3 screw boss version and a later 2 screw boss version.
The 3 screw oiler is alloy with a tiny cork washer (I think - the washer seems very robust for something so thin and it feels as if it had something in it to strengthen it) and this came off with hard finger pressure.
The 2 screw oiler is plastic and has no washer - like yours I assume. It was stuck fast but soaking in WD40 for half and hour and hard pressure from my thumb and forefinger wearing rubber washing up gloves got it off.
Thing is, although I like the design in theory, for my fingers it’s way too small to be convenient to use on the bank and in cold weather I could see it at the bottom of a lake or river! So, I’ve never used it for the purpose for which it was intended!
Wonderful reels though.
Best of luck with it.
Phil
The 3 screw oiler is alloy with a tiny cork washer (I think - the washer seems very robust for something so thin and it feels as if it had something in it to strengthen it) and this came off with hard finger pressure.
The 2 screw oiler is plastic and has no washer - like yours I assume. It was stuck fast but soaking in WD40 for half and hour and hard pressure from my thumb and forefinger wearing rubber washing up gloves got it off.
Thing is, although I like the design in theory, for my fingers it’s way too small to be convenient to use on the bank and in cold weather I could see it at the bottom of a lake or river! So, I’ve never used it for the purpose for which it was intended!
Wonderful reels though.
Best of luck with it.
Phil
From "... the wilds of the Wirral, whose wayward people both God and good men have quite given up on ...".
- Martin(rockape)
- Ruffe
- Posts: 73
- Joined: Fri Aug 02, 2019 2:55 am
- 4
- Location: Northamptonshire
Re: Avon Royal Supreme Wick Oiler
Just curious, definitely would have been better with a metal one with a large slot.
Regards
Martin
Regards
Martin
- Martin(rockape)
- Ruffe
- Posts: 73
- Joined: Fri Aug 02, 2019 2:55 am
- 4
- Location: Northamptonshire
Re: Avon Royal Supreme Wick Oiler
I wasn't able to free up the plaztic oil wicker so will just leave it looking pretty in red.
My recent purchase now fitted with a line guard, cleaned and a fresh dab of oil now looks and spins beautifully, its amazing how much really old oil on the spindle can slow tge pin down.
Do any of you guys put a dab of grease on the ratchet lever mechanism? I've just put a tiny bit of oil on mine.
Regards
Martin
My recent purchase now fitted with a line guard, cleaned and a fresh dab of oil now looks and spins beautifully, its amazing how much really old oil on the spindle can slow tge pin down.
Do any of you guys put a dab of grease on the ratchet lever mechanism? I've just put a tiny bit of oil on mine.
Regards
Martin
- Duckett
- Tench
- Posts: 2889
- Joined: Wed May 17, 2017 2:42 pm
- 6
- Location: Stratford E15
Re: Avon Royal Supreme Wick Oiler
I’ve tried oil and grease but now just put a drop of oil on the ratchet pawl. I find Gary Mills advice of wiping a ‘pin inside and out with an old oily rag after each session seems to keep things just fine. It’s not a problem with any G&Y style enclosed reel but with any open Ariel style ‘pin, grease just acts like a magnet to grit on the bank.Martin(rockape) wrote: ↑Sat May 15, 2021 9:26 pm I wasn't able to free up the plaztic oil wicker so will just leave it looking pretty in red.
My recent purchase now fitted with a line guard, cleaned and a fresh dab of oil now looks and spins beautifully, its amazing how much really old oil on the spindle can slow tge pin down.
Do any of you guys put a dab of grease on the ratchet lever mechanism? I've just put a tiny bit of oil on mine.
Regards
Martin
Phil
From "... the wilds of the Wirral, whose wayward people both God and good men have quite given up on ...".
- Martin(rockape)
- Ruffe
- Posts: 73
- Joined: Fri Aug 02, 2019 2:55 am
- 4
- Location: Northamptonshire
Re: Avon Royal Supreme Wick Oiler
Cheers Phil, that was my thought also i was just curious to know what others do.Duckett wrote: ↑Sat May 15, 2021 11:53 pmI’ve tried oil and grease but now just put a drop of oil on the ratchet pawl. I find Gary Mills advice of wiping a ‘pin inside and out with an old oily rag after each session seems to keep things just fine. It’s not a problem with any G&Y style enclosed reel but with any open Ariel style ‘pin, grease just acts like a magnet to grit on the bank.Martin(rockape) wrote: ↑Sat May 15, 2021 9:26 pm I wasn't able to free up the plaztic oil wicker so will just leave it looking pretty in red.
My recent purchase now fitted with a line guard, cleaned and a fresh dab of oil now looks and spins beautifully, its amazing how much really old oil on the spindle can slow tge pin down.
Do any of you guys put a dab of grease on the ratchet lever mechanism? I've just put a tiny bit of oil on mine.
Regards
Martin
Phil
Regards
Martin
- PeteB
- Stickleback
- Posts: 8
- Joined: Wed Aug 26, 2020 11:13 am
- 3
Re: Avon Royal Supreme Wick Oiler
I bought a ARS off of the well know action site, it arrived this morning and the plastic wick oiler was also locked solid.
Had some damage too where someone had tried to remove it with screwdriver. After cutting away the burrs I soaked it in WD40 for half hourthen got out my jewellery beading pliers (I use these for making wire eyes for my floats) and with a lille pressure it came free.
Had some damage too where someone had tried to remove it with screwdriver. After cutting away the burrs I soaked it in WD40 for half hourthen got out my jewellery beading pliers (I use these for making wire eyes for my floats) and with a lille pressure it came free.
You do not have the required permissions to view the files attached to this post.