Just taken delivery of my first Hardy Altex, a No.3 Mk V and was really surprised at the size of spools. After stripping the two spools of around 500 yards of line that you could hang your washing on I wondered if anyone knows the capacity of a single spool?
Also any way of estimating the year of manufacture? I know the maker but he was there for over 50 years so not a lot of help.
Any info would be greatly appreciated.
The reel appears to be in really good condition with most of it's original paint and mechanically very sound.
Hope I get the chance to use it this year as it will be paired with an Allcock's carp rod.
Hardy Altex line info please
- Andyman
- Bleak
- Posts: 108
- Joined: Tue Dec 10, 2019 1:03 pm
- 4
- Location: Sheffield
Hardy Altex line info please
You do not have the required permissions to view the files attached to this post.
It's All Too Beautiful but Keep on Rocking in the Free World
- Cat
- Chub
- Posts: 1111
- Joined: Wed Oct 03, 2018 8:27 pm
- 5
Re: Hardy Altex line info please
Hi Andymam,
Not sure of the exact capacity, but I load mine up with 10lb and 12lb. However, try to ensure it's really supple. It's looks like you have a classic Altex groove in the roller guide, so worth turning it, or alternatively replacing - I've discovered that a guide from a DAM 330 / 220 makes a good substitute, (perhaps with a little file on each end) and they are available new through Mike's Reel Repairs (in Canada), but I'm sure you may find one elsewhere.
Remember to get some oil though to the bearings via the side plate and down the worm gear + give a good clean with cotton buds. Lots posted on here about looking after an Altex...all worth a read.
Enjoy!
Regards Cat
Not sure of the exact capacity, but I load mine up with 10lb and 12lb. However, try to ensure it's really supple. It's looks like you have a classic Altex groove in the roller guide, so worth turning it, or alternatively replacing - I've discovered that a guide from a DAM 330 / 220 makes a good substitute, (perhaps with a little file on each end) and they are available new through Mike's Reel Repairs (in Canada), but I'm sure you may find one elsewhere.
Remember to get some oil though to the bearings via the side plate and down the worm gear + give a good clean with cotton buds. Lots posted on here about looking after an Altex...all worth a read.
Enjoy!
Regards Cat
- Andyman
- Bleak
- Posts: 108
- Joined: Tue Dec 10, 2019 1:03 pm
- 4
- Location: Sheffield
Re: Hardy Altex line info please
Thanks for that Cat.
Will take a closer look at the guide.
Pretty clean inside but cotton buds at the ready.
Will take a closer look at the guide.
Pretty clean inside but cotton buds at the ready.
It's All Too Beautiful but Keep on Rocking in the Free World
- AllRounder
- Brown Trout
- Posts: 1401
- Joined: Sun Nov 08, 2015 9:43 pm
- 8
- Location: Warwickshire
Re: Hardy Altex line info please
One things for sure it takes more than you’ll ever need!
I’ve permanently loaded mine with soft braid to leave enough for around 150yds of 10 or 12lb line and it spools up fine.
I’ve permanently loaded mine with soft braid to leave enough for around 150yds of 10 or 12lb line and it spools up fine.
- Andyman
- Bleak
- Posts: 108
- Joined: Tue Dec 10, 2019 1:03 pm
- 4
- Location: Sheffield
Re: Hardy Altex line info please
Yes, that is pretty much what I had intended doing although probably backing with something a bit cheaper than braid.
Does anyone know if the spools are interchangeable between No 2's and No 3's?
Does anyone know if the spools are interchangeable between No 2's and No 3's?
It's All Too Beautiful but Keep on Rocking in the Free World
- Cat
- Chub
- Posts: 1111
- Joined: Wed Oct 03, 2018 8:27 pm
- 5
Re: Hardy Altex line info please
No, they're a different size. Bail springs (as rare as Unicorn poo!) are interchangeable.
- Andyman
- Bleak
- Posts: 108
- Joined: Tue Dec 10, 2019 1:03 pm
- 4
- Location: Sheffield
Re: Hardy Altex line info please
Thanks again
So now looking for a No 2 with spare spool.
So now looking for a No 2 with spare spool.
It's All Too Beautiful but Keep on Rocking in the Free World
- Beresford
- Sea Trout
- Posts: 4261
- Joined: Sat Dec 17, 2011 1:26 pm
- 12
Re: Hardy Altex line info please
There seems to be a fairly regular supply on a well know online auction site. However, an Altex is a bit of a risky thing to buy sight unseen, in my view. I think they are prone to wear and damage more so than other spinning reels. The difference between a really sweet running one and what you typically find is quite dramatic. Unless you have somebody like Nobby or Watermole on hand to guide you and/or to rebuild and fettle as required I'd buy on exterior condition since that will give you a very good idea of how much use and how much abuse it has had. Although you'll pay rather more for it I'd buy a really good one from a dealer, on the understanding that it can be returned if you're not happy. I'd spend a lot of time quietly ticking it over very slowly and looking and feeling for any indication that things aren't running true or smoothly. In really fine fettle these reels are brilliant for close in fishing, in average condition they can feel a bit ragged and awkward.
I have a theory that most were sold for salmon spinning which might have put them on rocky riverbanks or in boats. This may account for the numbers I've seen with very subtle damage that puts something fractionally out of true or causes something to not quite feel right. I think the rotor is a bit fragile and susceptible to taking very soft dents, that can be hard to discover. Common use as a spinning reel, with the endless winding in, might explain why so many I've come across feel very worn.
I have a theory that most were sold for salmon spinning which might have put them on rocky riverbanks or in boats. This may account for the numbers I've seen with very subtle damage that puts something fractionally out of true or causes something to not quite feel right. I think the rotor is a bit fragile and susceptible to taking very soft dents, that can be hard to discover. Common use as a spinning reel, with the endless winding in, might explain why so many I've come across feel very worn.
The Split Cane Splinter Group