A Really New Rod

Andrew J. Davis Cane Rods forum.
User avatar
DWW
Perch
Posts: 454
Joined: Sat Feb 21, 2015 6:35 pm
Location: Cowfold, West Sussex

A Really New Rod

Post by DWW » Wed Aug 28, 2019 4:53 pm

I needed a rod that would measure no longer than 1m for both transportation by bike and for storage in a camper van on trips away . The rod also had to be a bit of an all rounder in the way that it would handle ( hopefully !) fish up to double figure carp sizes.
So not having such a thing I asked Andrew Davis to work his magic !
Anyway to cut a long story short the rod is underway and I will update you on progress and the results !
We have christened it the " Bike Rod " and at 10ft , three pieces and a handle I am really looking forward to seeing it and more importantly catching some fish with it !
DWW

User avatar
Barbulus
Eel
Posts: 2496
Joined: Sun Aug 25, 2013 1:51 pm
Location: Devon

Re: A Really New Rod

Post by Barbulus » Wed Aug 28, 2019 5:06 pm

I like the sound of this and look forward to seeing the finished rod. I had a particularly delightful two piece landing net custom made for me by Northern Nomad so that it fitted into a small car I had for my fishing ............ something rather nice about having custom gear made for you. How long from design to build ?

User avatar
Penninelad
Chub
Posts: 1240
Joined: Tue Dec 03, 2013 5:12 pm
Location: Sheffield

Re: A Really New Rod

Post by Penninelad » Thu Aug 29, 2019 12:40 pm

I rode a bike the other day for the first time since 1994(taking our foxhounds out for exercise) and will not be doing so again! The brakes did not work and going uphill the gear adjustment came off in my hand!I was half a mile behind the Hounds so I threw the bike in a ditch walked back to the Kennels and drove back to pick up the bike.The next day I could hardly walk! This marked the end of My bycyling career. However if I was up to it going fishing on a bike with the rod strapped on the crossbar would be very appealing.Its a great idea to have a rod made for this specific purpose and I look forward to seeing the end result of the commission.
Mark Davies

User avatar
Jeremy Croxall
Tench
Posts: 2648
Joined: Tue Oct 27, 2015 8:05 am
Location: Matlock Derbyshire

Re: A Really New Rod

Post by Jeremy Croxall » Thu Aug 29, 2019 10:34 pm

Penninelad wrote:
Thu Aug 29, 2019 12:40 pm
I rode a bike the other day for the first time since 1994(taking our foxhounds out for exercise) and will not be doing so again! The brakes did not work and going uphill the gear adjustment came off in my hand!I was half a mile behind the Hounds so I threw the bike in a ditch walked back to the Kennels and drove back to pick up the bike.The next day I could hardly walk! This marked the end of My bycyling career. However if I was up to it going fishing on a bike with the rod strapped on the crossbar would be very appealing.Its a great idea to have a rod made for this specific purpose and I look forward to seeing the end result of the commission.
You should follow the hounds on your horse Mark, no brakes or gears to worry about and a better seat!
With my silken line and delicate hook, I wander in a myriad of ripples and find freedom.
Li Yu

User avatar
James
Rudd
Posts: 317
Joined: Fri Dec 09, 2011 8:30 pm

Re: A Really New Rod

Post by James » Sun Jan 26, 2020 4:17 pm

I know Dave has been quiet a busy chap and has only been out a couple of times with his new Bike rod.
I thought i would hijack the thread and put some images of his new bike rod .ImageImageImageImageImage Its on my catalogue as The "Crossbar".Its 10ft 6in and when broken down is 34 inches long.

A J Davis [james]

User avatar
BoltonBullfinch
Crucian Carp
Posts: 793
Joined: Sun Aug 04, 2019 10:04 pm
Location: Bolton, Lancashire.

Re: A Really New Rod

Post by BoltonBullfinch » Sun Jan 26, 2020 4:21 pm

Fantastic idea, and the rod looks just as good. I look forwards to seeing the fish landed by it.

Thanks
BB
'We fish a lot' Forrest Gump.

User avatar
Barbulus
Eel
Posts: 2496
Joined: Sun Aug 25, 2013 1:51 pm
Location: Devon

Re: A Really New Rod

Post by Barbulus » Sun Jan 26, 2020 5:38 pm

I wondered what had happened since the original design and post. What a superb looking rod; a credit to Andrew Davis I think. Stunning.

User avatar
Tengisgol
Zander
Posts: 3507
Joined: Sun Apr 21, 2013 4:49 pm
Location: Essex Boy
Contact:

Re: A Really New Rod

Post by Tengisgol » Sun Jan 26, 2020 5:44 pm

Genius! As ever...
Where the willows meet the water...

https://sites.google.com/site/tengisgol/

User avatar
Mole-Patrol
Grayling
Posts: 708
Joined: Tue Oct 01, 2019 8:04 pm
Location: Charente, France

Re: A Really New Rod

Post by Mole-Patrol » Sun Jan 26, 2020 5:50 pm

I'm not going to show you my 'bike rod' now! I'm embarrassed after seeing that beauty :Cry:
Regards, Clive

I tread the paths where no-one goes and cast to fish nobody knows

(If I had realised how busy retirement would be, I'd have carried on working!)

User avatar
Jeremy Croxall
Tench
Posts: 2648
Joined: Tue Oct 27, 2015 8:05 am
Location: Matlock Derbyshire

Re: A Really New Rod

Post by Jeremy Croxall » Sun Jan 26, 2020 6:15 pm

That is just exquisite! Lovely coloured cane, a simple and elegant whipping style and a finish as close to perfection as it ever could be.
Fabulous workmanship Andrew and congratulations Dave on the acquisition of such a special fishing rod. :Hat:
With my silken line and delicate hook, I wander in a myriad of ripples and find freedom.
Li Yu

Post Reply

Return to “Andrew J. Davis Cane Rods”

Who is online

Users browsing this forum: No registered users and 2 guests