Raking the swim for tench
- DaceAce
- Eel
- Posts: 2200
- Joined: Wed Oct 24, 2012 12:42 pm
- 11
Re: Raking the swim for tench
With tench they can respond positively to the disturbance once they're used to the idea that there will be food waiting, both natural and introduced. When I used to rake the swim, because the rake was there to be used there was no worry about disturbance as it was used every day. The weed has gone now there and so has the rake but I reckon the tench would still respond to raking.
Re: Raking the swim for tench
Julian, I have one of those very same rakes. They were selling some on ebay a few years ago. Not bad, in fact quite good, but I have managed to bend it a few times and figured that if I didn't reinforce it somewhat it would end up breaking. It tends to bend across the width of the rake rather than the fingers them selves and I ended up screwing a piece of 2 12" X 1" oak batten on the back of the rake. Seems to have sorted the problem out, but if you want to be hauling real heavy stuff then I'd go and get one made up by a blacksmith. My brother did just that and what he's got is much better. Imagine a triangle of heavy thick steel, like a snooker framing triangle with a dozen 1/2" steel bars welded onto one side. it's got proper weight and is pretty much un-breakable.Julian wrote:Its something I should do more often. I have done it in the past with some success for tench.
But I do need to get a good rake. I currently have a single head metal garden rake attached to some strong cord , but really need a double headed one to be effective.
I found this website recently:
http://www.carletonhillfishery.com/nov_2010_009.htm
- Snape
- Bailiff
- Posts: 9984
- Joined: Sun Sep 04, 2011 11:52 am
- 12
- Location: North Oxfordshire
- Contact:
Re: Raking the swim for tench
Thanks for all the advice. I'll be giving it more of a go this summer.Haydn Clarke wrote:Julian, I have one of those very same rakes. They were selling some on ebay a few years ago. Not bad, in fact quite good, but I have managed to bend it a few times and figured that if I didn't reinforce it somewhat it would end up breaking. It tends to bend across the width of the rake rather than the fingers them selves and I ended up screwing a piece of 2 12" X 1" oak batten on the back of the rake. Seems to have sorted the problem out, but if you want to be hauling real heavy stuff then I'd go and get one made up by a blacksmith. My brother did just that and what he's got is much better. Imagine a triangle of heavy thick steel, like a snooker framing triangle with a dozen 1/2" steel bars welded onto one side. it's got proper weight and is pretty much un-breakable.Julian wrote:Its something I should do more often. I have done it in the past with some success for tench.
But I do need to get a good rake. I currently have a single head metal garden rake attached to some strong cord , but really need a double headed one to be effective.
I found this website recently:
http://www.carletonhillfishery.com/nov_2010_009.htm
This rake is like my one which I also bought from ebay. The alternative is I guess to wire 2 rake heads together back to back and attach a rope.
“Fishing is much more than fish. It is the great occasion when we may return to the fine simplicity of our forefathers,” Herbert Hoover.
`·.¸¸.·´¯`·.¸¸.·´¯`·.¸ ><((((º>
`·.¸¸.·´¯`·.¸¸.·´¯`·.¸ ><((((º>
Re: Raking the swim for tench
Another tip, Snape. Take some gloves. Some of the silt your hands will end up covered in will make the lunch time sarnies taste somewhat less delicious.
- Greentura
- Crucian Carp
- Posts: 870
- Joined: Mon Jan 23, 2012 11:00 pm
- 12
Re: Raking the swim for tench
I have worked my way through several rake head based weed rakes over the years, lost in lillies or just broken and a few years at I bought a heavy duty one which has backwards pointing prongs that can actually spear through waterlily tubers and drag them out with enough effort on the end of the rope. I have opened up several completely over grown swims with it on a couple of lakes as well as fit raking open areas before tenching. The gloves are a must as wet rope and silt are not kind to hands, apart from the stink. After raking I usually spread a few handfuls of corn around the area and fish worm and corn almost straight away and if I'm there for a few days I will often re-rake a few times over the session. I raked up a telescopic spinning rod and reel last year, complete with spoon. Only a cheap set and probably dumped by one of the many Eastern Europeans which have been caught a few times illegally fishing the lake.
- Dave Burr
- Honorary Vice President
- Posts: 13511
- Joined: Fri Jul 20, 2012 7:03 pm
- 11
- Location: Not far from the Wye
- Contact:
Re: Raking the swim for tench
One tip, make sure there's not too much weed. I once raked for over half an hour but still couldn't get a swan shot to reach bottom. Another 30-40 minutes of sweat and toil and I was just about there, then my mate turned up and asked why I hadn't raked his swim for him My reply was brief but succinct.
I only caught one tench.
I only caught one tench.
- Caractacus Potts
- Roach
- Posts: 254
- Joined: Mon Sep 05, 2011 8:25 pm
- 12
- Location: Wyeside.
Re: Raking the swim for tench
I made a weed rake some years ago by bolting two cheap rake heads back to back. It worked a treat. I'll have to dig it out of hibernation for the Spring tench season.
- Vole
- Rainbow Trout
- Posts: 3020
- Joined: Wed Oct 19, 2011 6:48 am
- 12
- Location: Barnet
Re: Raking the swim for tench
I use a single rake-head with lagging foam wired to the back, so it always lands teeth-down, and a metre of heavy chain to keep the angle of pull low. No use for serious gardening, but OK for "scratching their backs".
"Write drunk, edit sober" - Hemingway.
Hemingway didn't have to worry about accidentally hitting "submit" before he edited.
Hemingway didn't have to worry about accidentally hitting "submit" before he edited.
- Azur
- Dace
- Posts: 179
- Joined: Fri Feb 08, 2013 8:54 am
- 11
- Location: Surrey
Re: Raking the swim for tench
A very interesting thread, thanks everyone Has anyone ever tried specifically 'raking for carp'? I imagine on a weedy or silty lake the effect would be similar for all species?
Re: Raking the swim for tench
Hi Callum,Callum Harris wrote:A very interesting thread, thanks everyone Has anyone ever tried specifically 'raking for carp'? I imagine on a weedy or silty lake the effect would be similar for all species?
.....although I've never purposely "raked for Carp", it does work as I've had a fair few "encounters" with them whilst "Tenching".
The best of them was a beautiful coppery Common that weighed 21lbs 14oz and that really was fun on a 1.5lb TC, 8lb main with a 6lb hooklink in a heathland pond full of lillies!