Aspindale taper
Aspindale taper
I have been searching for some time with no luck to find the taper for the Aspindale 894b. Does anyone have the taper for this rod. Any information would be much appreciated.
- Nobby
- Wild Carp
- Posts: 10991
- Joined: Sun Oct 02, 2011 2:40 pm
- 12
- Location: S.W.Surrey
- Contact:
Re: Aspindale taper
It may be that owners of this super-rare rod would prefer the taper kept quiet lest more appear and lessen the value of their rod.
I can tell you that the rod was 11'6" long, two piece, dam-less hollow built and the tip section was hollow-built to a depth of 28.5cm from the ferrule. That's all I have.
I can tell you that the rod was 11'6" long, two piece, dam-less hollow built and the tip section was hollow-built to a depth of 28.5cm from the ferrule. That's all I have.
Re: Aspindale taper
Thanks for the reply Nobby , of course you are right. Fortunate indeed are those who have one.
- AshbyCut
- Honorary President
- Posts: 10148
- Joined: Sun May 06, 2012 1:27 am
- 12
- Location: North Warwickshire
Re: Aspindale taper
The tapers of my "Aero 894" (NOT 'b') wouldn't help, as the rod is 11ft 2in long, having each section measuring 67 inches (with a 20.75in. handle).
"Beside the water I discovered (or maybe rediscovered) the quiet. The sort of quiet that allows one to be woven into the tapestry of nature instead of merely standing next to it." Estaban.