Sorry if this has been covered before, but I’ve just taken possession of a wide drum aerial with a cork arbor insert and wondered if there was a way of stopping the line going down between the cork and the reel sides? I’ve seen the extremely clever inserts on here, but that kind of thing is beyond me and I was hoping a simple fix, like tape or, well, tape is all I can think. The gap isn’t huge, probably less than a mm, but that’s ample to alllow line down. The cork is still in good condition having been under ten miles of line (slight exaggeration, but there was a lot) for 40 years or so.
Any advise appreciated.
Allcock aerial
- Marc
- Sea Trout
- Posts: 4006
- Joined: Sun Mar 10, 2013 11:14 am
- 11
- Location: Co Durham, land of the prince bishops
Allcock aerial
Marc. (Prince of Durham)
“A life that partakes even a little of friendship, love, irony, humor, parenthood, literature, and music, and the chance to take part in battles for the liberation of others cannot be called 'meaningless'...”
“A life that partakes even a little of friendship, love, irony, humor, parenthood, literature, and music, and the chance to take part in battles for the liberation of others cannot be called 'meaningless'...”
- Vole
- Rainbow Trout
- Posts: 3020
- Joined: Wed Oct 19, 2011 6:48 am
- 12
- Location: Barnet
Re: Allcock aerial
Boiling, quite briefly, restores champagne corks to (almost) their original, cylindrical shape, so might be worth considering.
"Write drunk, edit sober" - Hemingway.
Hemingway didn't have to worry about accidentally hitting "submit" before he edited.
Hemingway didn't have to worry about accidentally hitting "submit" before he edited.
- Wallys-Cast
- Pike
- Posts: 6603
- Joined: Tue Mar 20, 2012 11:02 am
- 12
- Location: Durham.
Re: Allcock aerial
That's a great idea of Voles but if the boiling doesn't work try putting a couple of rows of heavy line on before your reel line, fly backing cabled on neatly would probably do the trick.
Wal.
Wal.
- Olly
- Wild Carp
- Posts: 9121
- Joined: Sat Dec 15, 2012 12:58 pm
- 11
- Location: Hants/Surrey/Berks borders.
Re: Allcock aerial
I have used cork with tape on the edges to reduce or get rid of the gap completely.
I purchased some thin 3mm I think rolls of cork so they will be a "made to measure" fit. On a couple of reels there are 2 wraps around the spool.
Also tried with the fly line backing and thick (15lb+) nylon over the cork but the tape seems to be more effective.
Although I only put 50 yards max on the reel whether 4lb mainline or 12lb for carp.
I purchased some thin 3mm I think rolls of cork so they will be a "made to measure" fit. On a couple of reels there are 2 wraps around the spool.
Also tried with the fly line backing and thick (15lb+) nylon over the cork but the tape seems to be more effective.
Although I only put 50 yards max on the reel whether 4lb mainline or 12lb for carp.
- Marc
- Sea Trout
- Posts: 4006
- Joined: Sun Mar 10, 2013 11:14 am
- 11
- Location: Co Durham, land of the prince bishops
Re: Allcock aerial
Thank you men.
Thrown up a couple of questions.
1) Would I boil it on the reel? Might sound stupid, but its natural state may be nothing that fits and aerial. Also, would a soak in warm water for an hour have the same results?
2) I've just looked at some 1.5mm cork sheet on the web and wondered if I measure it up carefully and basically add another layer to the top, would that be glued down or held down with the line?
The long and short being that I don't want to risk destroying the original cork, not for sentimental reasons, simply that I don't know where I'd get a replacement.
Thrown up a couple of questions.
1) Would I boil it on the reel? Might sound stupid, but its natural state may be nothing that fits and aerial. Also, would a soak in warm water for an hour have the same results?
2) I've just looked at some 1.5mm cork sheet on the web and wondered if I measure it up carefully and basically add another layer to the top, would that be glued down or held down with the line?
The long and short being that I don't want to risk destroying the original cork, not for sentimental reasons, simply that I don't know where I'd get a replacement.
Marc. (Prince of Durham)
“A life that partakes even a little of friendship, love, irony, humor, parenthood, literature, and music, and the chance to take part in battles for the liberation of others cannot be called 'meaningless'...”
“A life that partakes even a little of friendship, love, irony, humor, parenthood, literature, and music, and the chance to take part in battles for the liberation of others cannot be called 'meaningless'...”
- Olly
- Wild Carp
- Posts: 9121
- Joined: Sat Dec 15, 2012 12:58 pm
- 11
- Location: Hants/Surrey/Berks borders.
Re: Allcock aerial
I personally remove the old cork - or put the 3mm cork used in model railways at about £9.00 on thEbay - over the top.
No glue involved! Just a tight fit after cutting to the width and circumference of the spool - with a little bit over in order to seat it properly.
No glue involved! Just a tight fit after cutting to the width and circumference of the spool - with a little bit over in order to seat it properly.