The handle on my Trudex seems to be a tad loose (pointed to in pic) looks like some sort of rivet is there any way it can be tightened ? its not terrible just rocks a bit at present
regards
bjp
Although looking again there also maybe a very small pin above the rivet hard to know which one maybe the issue
Trudex handle
- OldTackle
- Arctic Char
- Posts: 1800
- Joined: Fri Jan 02, 2015 11:40 pm
- 9
- Location: Germany, Lower Saxony
Re: Trudex handle
Fixed mine by widening the center hole using a philips screw driver and a hammer. But gently!
< °) >>><( Christopher )><<< (° >
- Reedling
- Catfish
- Posts: 5585
- Joined: Fri Mar 01, 2013 11:41 am
- 11
- Location: Kent
Re: Trudex handle
I had a similar problem with a similar reel, I used a wide centre punch and tapped the centre of that rivet to expand its fit. it worked for me and the reel has been fine since.
- Nobby
- Wild Carp
- Posts: 10983
- Joined: Sun Oct 02, 2011 2:40 pm
- 12
- Location: S.W.Surrey
- Contact:
Re: Trudex handle
This was a recognised problem with the Trudex and later ones had a steel pin inserted. You could do that with a drill hole and a broken drill shaft, but a tap with a centrepunch should do it.
Hold the reel back so the rivet heads is sitting on a hard block of wood and hold a centrepunch on the tail of the rivet. Half a dozen very light taps with a hammer should do it......You're trying to gently tease the metal to a new shape, not deform it with two heavy blows. If it doesn't work immediately, just keep up the light taps until it does. That rivet is 53 years old.........
Hold the reel back so the rivet heads is sitting on a hard block of wood and hold a centrepunch on the tail of the rivet. Half a dozen very light taps with a hammer should do it......You're trying to gently tease the metal to a new shape, not deform it with two heavy blows. If it doesn't work immediately, just keep up the light taps until it does. That rivet is 53 years old.........
- Bjp
- Chub
- Posts: 1136
- Joined: Sun Sep 30, 2012 11:32 am
- 11
- Location: Surrey
Re: Trudex handle
Thank you gents i thought that was the only way.
Nobby mine looks like that one in pic, with what looks like a pin above the rivet head.
regards
Bernie
Nobby mine looks like that one in pic, with what looks like a pin above the rivet head.
regards
Bernie
- Nobby
- Wild Carp
- Posts: 10983
- Joined: Sun Oct 02, 2011 2:40 pm
- 12
- Location: S.W.Surrey
- Contact:
Re: Trudex handle
Ah then the fix wasn't much of a fix after all. If I can help sort it just let me know.
- Bjp
- Chub
- Posts: 1136
- Joined: Sun Sep 30, 2012 11:32 am
- 11
- Location: Surrey
Re: Trudex handle
i am not sure that is helping in fact i think it is getting worse even though i am being very careful so i will leave it for now and when we meet up maybe you could have a look at it for me see what you think Nobby
regards
bernie
regards
bernie
- Nobby
- Wild Carp
- Posts: 10983
- Joined: Sun Oct 02, 2011 2:40 pm
- 12
- Location: S.W.Surrey
- Contact:
Re: Trudex handle
Will do, Bernie.